User Manual

Unified IP MIB Reference 217
53-1003106-01
Interface media information table
9
Interface media information table
The following table shows the information of the media device installed in the physical ports.
These objects retrieve information from the output of the show media command.
Loopback interface configuration table
The following table lists the objects that are supported on the Brocade NetIron MLX, Brocade MLXe,
and Brocade NetIron XMR devices.
snIfOpticalLaneMonitoringRx
Power
brcdIp.1.1.3.3.10.1.1
Syntax: DisplayString
Read-only This object holds the value of the receiver optical signal power for
the lane in the interface, measured in dBm, followed by whether
this is a normal value, or high/low warning or alarm.
snIfOpticalLaneMonitoringTx
BiasCurrent
brcdIp.1.1.3.3.10.1.1
Syntax: DisplayString
Read-only The Tx Bias Current. It is measured in mA, and is followed by
whether this is a normal value, or high/low warning or alarm.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snIfMediaInfoTable
brcdIp.1.1.3.3.9
None The information of the media device (SFP/XFP/Copper) installed
in the physical port. Only the ifIndices of Ethernet ports that are
associated with the operational cards are included in this table.
snIfMediaType
brcdIp.1.1.3.3.9.1.1
Syntax: Display string
Read-only The type of the media installed in the physical port.
snIfMediaVendorName
brcdIp.1.1.3.3.9.1.2
Syntax: Display string
Read-only The media vendor name (full name of the corporation).
snIfMediaVersion
brcdIp.1.1.3.3.9.1.3
Syntax: Display string
Read-only The media vendor product version number.
snIfMediaPartNumber
brcdIp.1.1.3.3.9.1.4
Syntax: Display string
Read-only The media vendor part number.
snIfMediaSerialNumber
brcdIp.1.1.3.3.9.1.5
Syntax: Display string
Read-only The vendor serial number of the media device.