User Manual

Unified IP MIB Reference 219
53-1003106-01
Chapter
10
CAM Statistics
In this chapter
IP CAM statistics table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
CAM statistics table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
CAM profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
CAM usage for Layer 3 traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
CAM usage for Layer 2 traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
CAM usage session table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
CAM usage other table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
IP CAM statistics table
The following table lists the CAM statistics for Layer 3. The objects in the table are the output for
the dm cam-stat ip
command.
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
The output provides the following information:
L3 L3 1 - 2047 (0x00001 - 0x007ff), free 2047 (0x007ff)
L3 L2 2048 - 4095 (0x00800 - 0x00fff), free 2048 (0x00800)
Name, OID, and syntax Access Description
snCAMIpStatTable
brcdIp.1.1.2.12.2
None IP CAM statistics table.
snCAMIpStatIfIndex
brcdIp.1.1.2.12.2.1.1
Syntax: Unsigned32
Read-only The ifIndex value of the local interface.
snCAMIpStatLevel
brcdIp.1.1.2.12.2.1.2
Syntax: Unsigned32
Read-only The level of CAM entry for that interface.
snCAMIpStatFreeEntries
brcdIp.1.1.2.12.2.1.3
Syntax: Unsigned32
Read-only Free entries in the IP CAM for that interface and level.
snCAMIpStatTotalEntries
brcdIp.1.1.2.12.2.1.4
Syntax: Unsigned32
Read-only Total entries in the IP CAM for that interface and level.