User Manual

224 Unified IP MIB Reference
53-1003106-01
CAM usage session table
10
CAM usage session table
The following table contains information about the CAM usage on the device by sessions traffic.
snCamUsageL2Type
brcdIp.1.14.1.1.2.2.1.3
Syntax: Integer
None Identifies the type of Layer 2 traffic passing through the network
processor:
forwarding(1)
protocol(2)
flooding(3)
total(4)
snCamUsageL2Size
brcdIp.1.14.1.1.2.2.1.4
Syntax: Unsigned32
None Indicates the effective CAM size for this Layer 2 traffic entry. Each unit
is 8 bytes.
snCamUsageL2Free
brcdIp.1.14.1.1.2.2.1.5
Syntax: Gauge32
Read-only Shows the amount of CAM currently available for this Layer 2 traffic.
Each unit is 8 bytes.
snCamUsageL2UsedPercen
t
brcdIp.1.14.1.1.2.2.1.6
Syntax: Percent
Read-only Shows the percentage of CAM currently being used for this Layer 2
traffic.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snCamUsageSessionTable
brcdIp.1.14.1.1.2.3
None The CAM usage table for Layer 3 traffic.
snCamUsageSessionSlot
brcdIp.1.14.1.1.2.3.1.1
Syntax: Unsigned32
None A number that uniquely identifies an interface module on the
device.
snCamUsageSessionProcessor
brcdIp.1.14.1.1.2.3.1.2
Syntax: Unsigned32
None A number which uniquely identifies the network processor on
the interface module identified by the
“snCamUsageSessionSlot” object.
snCamUsageSessionType
brcdIp.1.14.1.1.2.3.1.3
Syntax: Integer
None Identifies the type of session:
ipv4Multicast(1)
ipv4andMacReceiveAcl(2)
ipv4andMacRuleAcl(3)
ipv4andMacTotal(4)
ipv4andMacOut(5)
ipv6Multicast(6)
ipv6ReceiveAcl(7)
ipv6RuleAcl(8)
ipv6Total(9)
ipv6Out(10)
labelOut(11)
ipv4SrcGuardDenial(12)
ipv4SrcGuardPermit(13)
internalForwardingLookup(14)