User Manual

Unified IP MIB Reference 227
53-1003106-01
Chapter
11
System DRAM
In this chapter
System DRAM information group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
System debug group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
System temperature table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
System temperature threshold table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
System stacking temperature table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Software licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
System DRAM information group
The system DRAM information group displays memory utilization statistics for protocols that use
dynamic memory allocation. It shows the same information that the show memory command
displays.
NOTE
The following table is not supported on the Brocade FastIron devices.
Name, OID, and syntax Access Description
snAgSystemDRAM
brcdIp.1.1.2.12.4
None The system DRAM information groups.
snAgSystemDRAMUtil
brcdIp.1.1.2.12.4.1
Syntax: Integer
Read-only The amount of system dynamic memory that is currently utilized, in
percent.
This object replaces “snAgGblDynMemUtil”.
snAgSystemDRAMTotal
brcdIp.1.1.2.12.4.2
Syntax: Integer
Read-only The total amount of system dynamic memory, in bytes.
This object replaces “snAgGblDynMemTotal”.
snAgSystemDRAMFree
brcdIp.1.1.2.12.4.3
Syntax: Integer
Read-only The amount of free system dynamic memory, in bytes.
This object replaces “snAgGblDynMemFree”.
snAgSystemDRAMForBGP
brcdIp.1.1.2.12.4.4
Syntax: Integer
Read-only The amount of free dynamic memory used by BGP, in bytes.
snAgSystemDRAMForOSPF
brcdIp.1.1.2.12.4.5
Syntax: Integer
Read-only The amount of free dynamic memory used by OSPF, in bytes.