User Manual

228 Unified IP MIB Reference
53-1003106-01
System debug group
11
System debug group
The following objects are for debugging. They are equivalent to the debug command.
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
snAgSystemDebug
brcdIp.1.1.2.12.5
None The system debug group.
snAgSystemDebugTotalIn
brcdIp.1.1.2.12.5.1
Syntax: Unsigned32
Read-only Total incoming packet count. Sum of buffer manager and CPU read
count.
snAgSystemDebugTotalOut
brcdIp.1.1.2.12.5.2
Syntax: Unsigned32
Read-only Total outgoing packet count.
snAgSystemDebugCpuQueu
eRead
brcdIp.1.1.2.12.5.3
Syntax: Unsigned32
Read-only CPU queue read count.
snAgSystemDebugDRAMBu
ffer
brcdIp.1.1.2.12.5.4
Syntax: Unsigned32
Read-only DRAM buffer count.
snAgSystemDebugBMBuffer
brcdIp.1.1.2.12.5.5
Syntax: Unsigned32
Read-only Buffer Manager (BM) buffer count.
snAgSystemDebugBMFreeB
uffer
brcdIp.1.1.2.12.5.6
Syntax: Unsigned32
Read-only Free BM buffer count.
snAgSystemDebugBMFreeB
ufferMgmt
brcdIp.1.1.2.12.5.7
Syntax: Unsigned32
Read-only Free BM buffer management count.
snAgSystemDebugIpcGigLo
ck
brcdIp.1.1.2.12.5.8
Syntax: Unsigned32
Read-only IPC gigabyte lock count.
snAgSystemDebugDRAMGe
tError
brcdIp.1.1.2.12.5.9
Syntax: Unsigned32
Read-only DRAM get error count.
snAgSystemDebugDRAMTo
BMCopyFail
brcdIp.1.1.2.12.5.10
Syntax: Unsigned32
Read-only DRAM to BM copy fail count.