User Manual

Unified IP MIB Reference 235
53-1003106-01
Software licensing
11
Interface module auto-upgrade objects
The following objects are for configuring the interface module auto-upgrade process for the
Brocade NetIron devices.
Name, OID, and syntax Access Description
brcdSwPackageLoadResultTa
ble
brcdIp.1.1.2.16.1.5
None Contains the summary of the upgrade operation.
brcdSwPackageUpgradeResu
ltIndex
brcdIp.1.1.2.16.1.5.1.1
Syntax: Unsigned32
None Specifies the sequential index or upgrade step.
brcdSwPackageUpgradeResu
ltImageType
brcdIp.1.1.2.16.1.5.1.2
Syntax: BrcdImageType
Read-only Specifies the associated image type for the step of the
upgrade process.
brcdSwPackageUpgradeResu
ltStatus
brcdIp.1.1.2.16.1.5.1.3
Syntax: Integer
Read-only Indicates the upgrade status for the particular image
upgrade.
brcdSwPackageUpgradeResu
ltTimeStamp
brcdIp.1.1.2.16.1.5.1.4
Syntax: TimeStamp
Read-only Specifies the time stamp when the upgrade step is
performed.
brcdSwPackageUpgradeResu
ltDescription
brcdIp.1.1.2.16.1.5.1.5
Syntax: DisplayString
Read-only Contains the summary description for the particular
image upgrade.
NOTE: The result description is empty when
brcdSwPackageLoadResultStatus is “ok”.
brcdSwPackageUpgradeSkip
VersionCheck
brcdIp.1.1.2.16.1.5.1.6
Syntax: TruthValue
Read-write Skips the version comparison of the FPGA images. By
default, performs the version comparison between the
image version in the manifest file with the file installed in
the system.
• true - Forces the system to upgrade the images by
skipping the version check
• false - Default value
NOTE: This object is not supported on the Brocade
NetIron CES and Brocade NetIron CER series
devices. Also not supported to LP Auto-upgrade
modules.