User Manual

Unified IP MIB Reference 237
53-1003106-01
Chapter
12
NTP MIB Definition
In this chapter
•NTP general group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
•NTP server table (IPv4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
•NTPv4 server table (FastIron X series IPv6 devices). . . . . . . . . . . . . . . . . . 239
NTP general group
You can configure Layer 2 and Layer 3 switches to consult SNTP servers for the current system time
and date. As Layer 2 and Layer 3 switches do not retain time and date information across power
cycles, using the SNTP feature alleviates the need to reconfigure time and date after a system
reset.
The following objects provide information on the NTP server. These objects apply to all devices.
Name, OID, and syntax Access Description
snNTPGeneral
brcdIp.1.1.3.11.1
None Begins the NTP configuration objects.
snNTPPollInterval
brcdIp.1.1.3.11.1.1
Syntax: Integer
NOTE: This MIB object is
deprectated on the
Brocade NetIron
devices.
Read-write Specifies how often to poll the NTP server. Each unit is one second.
Valid values: 1 – 65535
Default: 1800 seconds
snNTPTimeZone
brcdIp.1.1.3.11.1.2
Syntax: Integer
Read-write Time zone:
• alaska(0)
• aleutian(1)
• arizona(2)
• central(3)
• eastIndiana(4)
• eastern(5)
• hawaii(6)
• michigan(7)
• mountain(8)
• pacific(9)
• samoa(10)
• gmtPlus1200(11)
• gmtPlus1100(12)
• gmtPlus1000(13)
• gmtPlus0900(14)