User Manual

Unified IP MIB Reference 239
53-1003106-01
NTP server table (IPv4)
12
NTP server table (IPv4)
The following objects apply to all IPv4 devices of the Brocade FastIron devices. They provide
information on the NTP server.
NOTE
The following table is deprecated on the Brocade NetIron devices.
NTPv4 server table (FastIron X series IPv6 devices)
The following table is deprecated on the Brocade FastIron devices and replaced with “NTP server
table (IPv4)” table.
snNTPSystemClock
brcdIp.1.1.3.11.1.4
Syntax: OCTET STRING
Read-write Shows the format of the system clock:
• octet 0 – Seconds after the minute [0-60]
• octet 1 – Minutes after the hour [0-59]
• octet 2 – Hours since midnight [0-23]
• octet 3 – Day of the month [1-31]
• octet 4 – Months since January [0-11]
• octet 5 – Years since 1900
• octet 6 – Days since Sunday [0-6]
Octets 0 to 5 must have valid values and Octet 6 must be set to 0. To
disable the system clock set all octets to zero.
snNTPSync
brcdIp.1.1.3.11.1.5
Syntax: Integer
NOTE: This MIB object is
deprecated on the
Brocade NetIron
devices.
Read-write Initiates the time synchronization to the NTP servers.
For set operation, only "synchronize(2)" is accepted.
For get operation, always return "other(1)".
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snNTPServerTable
brcdIp.1.1.3.11.2
None The NTP server table.
snNTPServerIp
brcdIp.1.1.3.11.2.1.1
Syntax: IpAddress
Read-only Shows the IP address of the NTP server.
snNTPServerVersion
brcdIp.1.1.3.11.2.1.2
Syntax: Integer
Read-write Shows the version in the NTP server.
Default: 1
snNTPServerRowStatus
brcdIp.1.1.3.11.2.1.3
Syntax: Integer
Read-write Creates or deletes an NTP server table entry:
• other(1)
• valid(2)
• delete(3)
• create(4)