User Manual

Unified IP MIB Reference 249
53-1003106-01
IP prefix list table
14
snIpPrefixListAddr
brcdIp.1.2.2.14.1.5
Syntax: IpAddress
Read-write Shows the IP address of the prefix.
snIpPrefixListMask
brcdIp.1.2.2.14.1.6
Syntax: IpAddress
NOTE: This object is not
supported on the
Brocade NetIron
MLX, Brocade
MLXe, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-write Shows the number of bits in the prefix network mask.
snIpPrefixListGeValue
brcdIp.1.2.2.14.1.7
Syntax: Integer
Read-write Specifies that the prefix is greater than the value of the
“snIpPrefixListMask” object.
Valid values: 0 – 32
snIpPrefixListLeValue
brcdIp.1.2.2.14.1.8
Syntax: Integer
Read-write Specifies that the prefix is less than the value of the
“snIpPrefixListMask” object.
Valid values: 0 – 32
NOTE: You can specify a range of length for prefixes that are more specific than the values for the
“snIpPrefixListAddr” and “snIpPrefixListMask” objects. The ge-value or le-value you specify must meet the
following condition:
length < ge-value <= le-value <= 32
If a value for “snIpPrefixListGeValue” is specified, then the mask-length range is from the value of
“snIpPrefixListGeValue” to 32.
If a value for “snIpPrefixListLeValue” is specified, then mask-length range is from length to the value of
“snIpPrefixListLeValue”.
If no value is specified for either the less than or greater than objects, then routes must exactly match the prefixes
on the list.
snIpPrefixListRowStatus
brcdIp.1.2.2.14.1.9
Syntax: Integer
Read-write Controls the management of the table rows. The values that can be
written are:
• delete(3) – Deletes the row
• create(4) – Creates a new row
• modify(5) – Modifies an existing row
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row
• invalid(1) – Row is inoperative
• valid(2) – Row exists and is valid
snIpPrefixListLength
brcdIp.1.2.2.14.1.10
Syntax: Integer32
Read-write The length of the IP prefix’s mask.
Name, OID, and Syntax Access Description