User Manual

260 Unified IP MIB Reference
53-1003106-01
Packet port information table
16
snPOSInOctets
brcdIp.1.2.14.1.1.1.25
Syntax: OCTET STRING
Read-only The total number of packets in octets that were received on the
interface, including framing characters.
This object is a 64-bit counter of the ifInOctets object, defined in
RFC 1213. The octet string is in big-endian byte order.
snPOSOutOctets
brcdIp.1.2.14.1.1.1.26
Syntax: OCTET STRING
Read-only The total number of packets in octets that were transmitted out of
the interface, including framing characters.
This object is a 64-bit counter of the ifOutOctets object, defined in
RFC 1213. The octet string is in big-endian byte order.
snPOSStatsInBitsPerSec
brcdIp.1.2.14.1.1.1.27
Syntax: Gauge
Read-only The number of bits per second received on the interface over a
five-minute interval.
snPOSStatsOutBitsPerSec
brcdIp.1.2.14.1.1.1.28
Syntax: Gauge
Read-only The number of bits per second transmitted out of the interface over
a five-minute interval.
snPOSStatsInPktsPerSec
brcdIp.1.2.14.1.1.1.29
Syntax: Gauge
Read-only The number of packets per second received on the interface over a
five-minute interval.
snPOSStatsOutPktsPerSec
brcdIp.1.2.14.1.1.1.30
Syntax: Gauge
Read-only The number of packets per second transmitted out of the interface
over a five-minute interval.
snPOSStatsInUtilization
brcdIp.1.2.14.1.1.1.31
Syntax: Integer
Read-only The network utilization by incoming traffic in hundredths of a
percent over a five-minute interval.
NOTE: This object is not supported.
snPOSStatsOutUtilization
brcdIp.1.2.14.1.1.1.32
Syntax: Integer
Read-only The network utilization by outgoing traffic in hundredths of a
percent over a five-minute interval.
NOTE: This object is not supported.
snPOSTagType
brcdIp.1.2.14.1.1.1.33
Syntax: Integer
Read-only Shows whether or not the port has a VLAN tag:
• tagged(1) – The port has a VLAN tag. This port can have
multiple VLANs.
• untagged(2) – The port is not tagged.
snPOSStatsB1
brcdIp.1.2.14.1.1.1.34
Syntax: Counter
Read-only Shows the number of received frames that have parity errors at the
section layer of the SONET link.
snPOSStatsB2
brcdIp.1.2.14.1.1.1.35
Syntax: Counter
Read-only Shows the number of received frames that have parity errors at the
line layer of the SONET link.
snPOSStatsB3
brcdIp.1.2.14.1.1.1.36
Syntax: Counter
Read-only Shows the number of received frames that have parity errors at the
path layer of the SONET link.
snPOSStatsAIS
brcdIp.1.2.14.1.1.1.37
Syntax: Counter
Read-only Shows the number of Alarm Indicator Signals (AISs) that were
received by the interface.
snPOSStatsRDI
brcdIp.1.2.14.1.1.1.38
Syntax: Counter
Read-only Shows the number of Remote Defect Indicator (RDI) signals that
were received by the interface.
Name, OID, and syntax Access Description