User Manual

264 Unified IP MIB Reference
53-1003106-01
POS cHDLC group
16
POS cHDLC group
If the snPOSInfo2Encapsulation object is set to Cisco High-level Data Link Control (cHDLC), the
following table provides information on various cHDLC parameters.
Name, OID, and syntax Access Description
snPOScHDLCTable
brcdIp.1.2.14.1.4
None The POS cHDLC group table.
snPOScHDLCLineState
brcdIp.1.2.14.1.4.1
Syntax: Integer
Read-only The state of the POS cHDLC line:
• down(0)
• up(1)
• unknown(2)
snPOScHDLCInLoopback
brcdIp.1.2.14.1.4.2
Syntax: Integer
Read-only Indicates if cHDLC in loopback is used:
• no(0)
• yes(1)
• unknown(2)
snPOScHDLCMySeq
brcdIp.1.2.14.1.4.3
Syntax: Unsigned32
Read-only The cHDLC of the device’s sequence number.
snPOScHDLCMySeqSeen
brcdIp.1.2.14.1.4.4
Syntax: Unsigned32
Read-only The cHDLC of the device’s sequence number that is
seen.
snPOScHDLCPeerSeqSeen
brcdIp.1.2.14.1.4.5
Syntax: Unsigned32
Read-only The cHDLC peer sequence number seen.
snPOScHDLCUniqueSent
brcdIp.1.2.14.1.4.6
Syntax: Unsigned32
Read-only The unique cHDLC sent.
snPOScHDLCUniqueReceived
brcdIp.1.2.14.1.4.7
Syntax: Unsigned32
Read-only The unique cHDLC received.