User Manual

Unified IP MIB Reference 271
53-1003106-01
Stacking operation unit table
18
Stacking operation unit table
Use the following table to display information about the role and status of a unit in a stack.
snStackingConfigUnitRowSt
atus
brcdIp.1.1.3.31.2.1.1.4
Syntax: Integer
Read-write This object is used to delete a row in the table and control if they are
used. The following values can be written for a SET:
delete(3) - Deletes the row. Deleted rows are deleted
immediately.
The following values can be returned on reads:
noSuchName - No such row
other(1) - Some other cases
valid(2) - The row exists and is valid
snStackingConfigUnitType
brcdIp.1.1.3.31.2.1.1.5
Syntax: DisplayString
Read-only A description of the configured or active system type for each unit.
snStackingConfigUnitState
brcdIp.1.1.3.31.2.1.1.6
Syntax: Integer
Read-only The state of the unit:
local(1)
remote(2)
reserved(3)
empty(4)
snStackingConfigUnitStackP
ort1
brcdIp.1.1.3.31.2.1.1.7
Syntax: InterfaceIndex
Read-only First stack port for each unit. It returns 0 if the stack port does not
exist.
snStackingConfigUnitStackP
ort2
brcdIp.1.1.3.31.2.1.1.8
Syntax: InterfaceIndex or
zero
Read-only Second stack port for each unit. It returns 0 if the stack port does not
exist.
snStackingConfigUnitStackC
onnectPort1
brcdIp.1.1.3.31.2.1.1.9
Syntax: InterfaceIndex or
zero
Read-write The first connect port for a peripheral unit in a family stacking
system. A peripheral unit can have up to two connect ports that can
be connected to any suggested neighbor linking ports. Returns 0 if
the connect port does not exist.
snStackingConfigUnitStackC
onnectPort2
brcdIp.1.1.3.31.2.1.1.10
Syntax: InterfaceIndex or
zero
Read-write The second connect port for a peripheral unit in a family stacking
system. A peripheral unit can have up to two connect ports that can
be connected to any suggested neighbor linking ports. Returns 0 if
the connect port does not exist.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snStackingOperUnitTable
brcdIp.1.1.3.31.2.2
None Stacking operation unit table.
snStackingOperUnitIndex
brcdIp.1.1.3.31.2.2.1.1
Syntax: Integer
None ID of the unit in the stack.