User Manual

Unified IP MIB Reference 279
53-1003106-01
FDP global configuration objects
19
FDP global configuration objects
The following objects are used to configure FDP globally.
snFdpCacheIsAggregateVlan
brcdIp.1.1.3.20.1.2.1.1.11
Syntax: Integer
Read-only Indicates if this entry is from a neighbor device that is in an
aggregated VLAN:
• false(0) – It is not in an aggregated VLAN.
• true(1) – It is in an aggregate VLAN.
snFdpCacheDeviceTagType
brcdIp.1.1.3.20.1.2.1.1.12
Syntax: Integer
Read-only Shows the tag type of the neighbor device that sent this entry.
snFdpCacheDevicePortVlan
Mask
brcdIp.1.1.3.20.1.2.1.1.13
Syntax: OCTET STRING
Read-only Shows the port VLAN masks, in a 512-byte octet string, of the
neighbor that sent this entry.
snFdpCachePortTagMode
brcdIp.1.1.3.20.1.2.1.1.14
Syntax: Integer
Read-only Shows the port tag mode on the neighbor device:
• untagged(1)
• tagged(2)
• dual(3)
snFdpCacheDefaultTrafficeVl
anIdForDualMode
brcdIp.1.1.3.20.1.2.1.1.15
Syntax: Integer32
Read-only Shows the default traffic a VLAN ID for neighbor devices that have
dual-mode ports.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snFdpGlobalRun
brcdIp.1.1.3.20.1.3.1
Syntax: Integer
Read-write Indicates if the FDP is enabled:
• false(0) – FDP is disabled. FDP entries in snFdpCacheTable are
deleted when FDP is disabled.
• true(1) – FDP is enabled. Enabling FDP automatically enables
CDP globally.
Default: false(0)
snFdpGlobalMessageInterval
brcdIp.1.1.3.20.1.3.2
Syntax: Integer
Read-write Indicates the interval at which FDP messages are to be generated.
Valid values: 5 – 900 seconds
Default: 60 seconds
snFdpGlobalHoldTime
brcdIp.1.1.3.20.1.3.3
Syntax: Integer
Read-write Indicates how long the receiving device will hold FDP messages.
Valid values: 10 – 255 seconds
Default: 180 seconds
snFdpGlobalCdpRun
brcdIp.1.1.3.20.1.3.4
Syntax: Integer
Read-write Shows if the CDP is enabled:
• false(0) – CDP is disabled. CDP entries in snFdpCacheTable
are deleted when FDP is disabled.
• true(1) – CDP is enabled. Enabling CDP does not automatically
enable FDP globally.
Default: false (0)