User Manual

298 Unified IP MIB Reference
53-1003106-01
NetFlow Export
22
NetFlow Export collector table
The following table provides information about the NetFlow Export collector.
Collectors are where expired UPD packets from devices are sent.
NetFlow Export aggregation table
The following table provides information on the NetFlow Export aggregation schemes.
By default, NetFlow Export exports a separate flow for each unique set of flow information. To
streamline data export, you can consolidate flows by creating aggregate caches that contain
individual flows based on specific information in the flow.
Name, OID, and syntax Access Description
snNetFlowCollectorTable
brcdIp.1.1.3.18.2
None A table of NetFlow Export collector information.
snNetFlowCollectorIndex
brcdIp.1.1.3.18.2.1.1
Syntax: Integer
Read-only The index to the NetFlow Export collector table.
Valid values: 1 – 10
snNetFlowCollectorIp
brcdIp.1.1.3.18.2.1.2
Syntax: IpAddress
Read-write Shows the IP address of the collector.
snNetFlowCollectorUdpPort
brcdIp.1.1.3.18.2.1.3
Syntax: Integer32
Read-write Shows the UDP port number of the collector.
snNetFlowCollectorSourceInterf
ace
brcdIp.1.1.3.18.2.1.4
Syntax: Integer
Read-write Shows the source port for the NetFlow Export packets. Packets
will be exported through this port:
• A valid port number – The port configured to be the source
port.
• 0 – No source port specified. The port connected to the
collector is the source port.
snNetFlowCollectorRowStatus
brcdIp.1.1.3.18.2.1.5
Syntax: Integer
Read-write Creates or deletes a NetFlow Export collector table entry:
• other(1)
• valid(2)
• delete(3)
• create(4)