User Manual

316 Unified IP MIB Reference
53-1003106-01
VLAN by IPX network configuration table
23
snVLanByIpxNetFrameType
brcdIp.1.1.3.2.4.1.3
Syntax: Integer
Read-only Shows the frame type for the Layer 3 VLAN:
• notApplicable(0) – If none of the following options is selected
• ipxEthernet8022(1)
• ipxEthernet8023(2)
• ipxEthernetII(3)
• ipxEthernetSnap(4)
Each IPX Network Number must be assigned with one unique
Frame type; otherwise, an SNMP-SET error will be returned.
snVLanByIpxNetDynamic
brcdIp.1.1.3.2.4.1.4
Syntax: Integer
Read-write Applies only to switches. Indicates whether or not dynamic port
inclusion is enabled:
• disabled(0)
• enabled(1)
snVLanByIpxNetStaticMask
brcdIp.1.1.3.2.4.1.5
Syntax: PortMask
Read-write Shows the VLAN by IPX network port membership applied in static
mode.
snVLanByIpxNetExcludeMask
brcdIp.1.1.3.2.4.1.6
Syntax: PortMask
Read-write Shows the VLAN by IPX network port membership applied in
exclusive mode.
snVLanByIpxNetRouterIntf
brcdIp.1.1.3.2.4.1.7
Syntax: Integer
Read-write Applies only to routers and is optional. It shows the virtual interface
of a router to the VLAN.
Valid values: 0 – 60; however, this object is not configured if an
SNMP-Get is equal to zero.
snVLanByIpxNetRowStatus
brcdIp.1.1.3.2.4.1.8
Syntax: Integer
Read-write Controls the management of the table rows. The following values
can be written:
• delete(3) – Deletes the row.
• create(4) – Creates a new row.
• modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row.
• invalid(1) – Row is inoperative.
• valid(2) – Row exists and is valid.
snVLanByIpxNetDynamicMask
brcdIp.1.1.3.2.4.1.9
Syntax: PortMask
Read-only Shows the VLAN by IPX network active port membership.
snVLanByIpxNetChassisStatic
Mask
brcdIp.1.1.3.2.4.1.10
Syntax: OCTET STRING
Read-write This object has 32 octets and it is replaced by
“snVLanByIpxNetStaticPortList”.
Shows the chassis VLAN by IPX network port membership applied
in static mode.
snVLanByIpxNetChassisExclud
eMask
brcdIp.1.1.3.2.4.1.11
Syntax: OCTET STRING
Read-write This object has 32 octets and it is replaced by
“snVLanByIpxNetExcludePortList”.
Shows the chassis VLAN by IPX network port membership applied
in exclusive mode.
snVLanByIpxNetChassisDyna
micMask
brcdIp.1.1.3.2.4.1.12
Syntax: OCTET STRING
Read-only This object has 32 octets and it is replaced by
“snVLanByIpxNetDynamicPortList”.
Shows the chassis VLAN by IPX network port membership.
Name, OID, and syntax Access Description