User Manual

Unified IP MIB Reference 331
53-1003106-01
Chapter
26
MRP MIB Definition
In this chapter
•MRP table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
MRP table
The following table contains information about Metro Ring Protocol (MRP) MIB objects.
Name, OID, and syntax Access Description
snMetroRingTable
brcdIp.1.1.3.29.2.1
None The MRP table.
snMetroRingVlanId
brcdIp.1.1.3.29.2.1.1.1
Syntax: Integer32
None Identifies a VLAN that controls the metro ring.
snMetroRingId
brcdIp.1.1.3.29.2.1.1.2
Syntax: Integer32
None The metro ring identifier.
snMetroRingConfigState
brcdIp.1.1.3.29.2.1.1.3
Syntax: Integer
Read-write The state of the metro ring.
snMetroRingRole
brcdIp.1.1.3.29.2.1.1.4
Syntax: Integer
Read-write Shows the metro ring role:
• other(1) - None of the cases below.
• master(2) - Device which originates RHP packets.
• member(3) - Device which forwards RHP packets.
snMetroRingHelloTime
brcdIp.1.1.3.29.2.1.1.5
Syntax: Integer32
Read-write The time interval to periodically transmit Ring Health Protocol
(RHP) in milliseconds.
snMetroRingPreforwardingTime
brcdIp.1.1.3.29.2.1.1.6
Syntax: Integer32
Read-write The time interval that a metro ring stays in the preforwarding
state before changing to the forwarding state (in milliseconds).
snMetroRingPort1
brcdIp.1.1.3.29.2.1.1.7
Syntax: InterfaceIndex
Read-write The ifIndex value of port 1 to configure into the metro ring.
snMetroRingPort2
brcdIp.1.1.3.29.2.1.1.8
Syntax: InterfaceIndex
Read-write The ifIndex value of port 2 to configure into the metro ring.
snMetroRingName
brcdIp.1.1.3.29.2.1.1.9
Syntax: DisplayString
Read-write The description of the metro ring.