User Manual

Unified IP MIB Reference 343
53-1003106-01
Chapter
29
TACACS Group
In this chapter
•TACACS general MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343
•TACACS server table (IPv4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
•TACACS server table (FastIron X series IPv6 devices) . . . . . . . . . . . . . . . . . 344
TACACS general MIBs
The Terminal Access Controller Access Control System (TACACS) or security protocols can be used
to authenticate the following types of access to devices:
• Telnet access
• SSH access
• Access to management functions
• Web management access
• Access to the Privileged EXEC level and CONFIG level of the CLI
The TACACS and protocols define how authentication, authorization, and accounting (AAA)
information is sent between a device and an authentication database on a TACACS server.
The following objects provide information on TACACS authentication and apply to all devices.
Name, OID, and syntax Access Description
snTacacsRetransmit
brcdIp.1.1.3.13.1.1
Syntax: Integer
Read-write Shows the number of authentication query retransmissions to the
TACACS server.
Valid values: 1 – 5
Default: 3
snTacacsTimeOut
brcdIp.1.1.3.13.1.2
Syntax: Integer
Read-write Specifies how many seconds to wait for an authentication reply from the
TACACS server.
Valid values: 0 – 15
Default: 3 seconds
snTacacsDeadTime
brcdIp.1.1.3.13.1.3
Syntax: Integer
Read-write Specifies the TACACS server dead time in minutes.
Valid values: 0 – 5
Default: 3 minutes