User Manual

352 Unified IP MIB Reference
53-1003106-01
802.1x authentication global administration
30
802.1x authentication global administration
The following scalar object enables or disables 802.1X authentication globally.
Name, OID, and syntax Access Description
brcdDot1xAuthMacSessio
nAuthMac
brcdIp.1.1.3.38.5.1.1.1
Syntax: MacAddress
NA MAC address of the client, which represents the user name used for
RADIUS authentication.
brcdDot1xAuthMacSessio
nUserName
brcdIp.1.1.3.38.5.1.1.2
Syntax: SnmpAdminString
Read-only User name of the 802.1x MAC session.
brcdDot1xAuthMacSessio
nIncomingVlanId
brcdIp.1.1.3.38.5.1.1.3
Syntax: VlanId
Read-only Incoming VLAN ID.
brcdDot1xAuthMacSessio
nCurrentVlanId
brcdIp.1.1.3.38.5.1.1.4
Syntax: VlanId
Read-only The VLAN to which the port is currently assigned.
brcdDot1xAuthMacSessio
nAccessStatus
brcdIp.1.1.3.38.5.1.1.5
Syntax: Integer
Read-only Authentication state of the 802.1X MAC session:
• permit(1)
• blocked(2)
• restrict(3)
• init(4)
brcdDot1xAuthMacSessio
nMaxAge
brcdIp.1.1.3.38.5.1.1.6
Syntax: Unsigned32
Read-only Maximum age of the MAC session in which the MAC address is
authenticated.
brcdDot1xAuthMacSessio
nAddrType
brcdIp.1.1.3.38.5.1.1.7
Syntax: InetAddressType
Read-only IP address type of the client (supplicant):
• ipv4(1)
• ipv6(2)
Default: ipv4(1)
brcdDot1xAuthMacSessio
nIpAddr
brcdIp.1.1.3.38.5.1.1.8
Syntax: InetAddress
Read-only The IP address of the client.
brcdDot1xAuthMacSessio
nAging
brcdIp.1.1.3.38.5.1.1.9
Syntax: Integer
Read-only The type of aging being performed:
• software(1)
• hardware(2)
• ena(3) - Aging has not started.
• notapplicable(4) - Fake 802.1x MAC session.