User Manual

Unified IP MIB Reference 361
53-1003106-01
Chapter
33
Port MAC Security
In this chapter
•Port MAC security table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
•Port MAC security table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
•Port MAC security module statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . 362
•Port MAC security interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
•Port MAC security interface MAC table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
•Port MAC security autosave MAC table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
•Port MAC security global MIB group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
•Port monitor table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Port MAC security MIBs are not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Port MAC security table
The following table shows the same information as the show port security mac CLI command.
Name, OID, and syntax Access Description
snPortMacSecurityTable
brcdIp.1.1.3.24.1.1.1
None The port MAC security table.
snPortMacSecurityIfIndex
brcdIp.1.1.3.24.1.1.1.1.1
Syntax: Unsigned32
Read-only The ifIndex value (ID) of the Ethernet interface on which Port MAC
security is enabled.
snPortMacSecurityResource
brcdIp.1.1.3.24.1.1.1.1.2
Syntax: Integer
Read-only Indicates how the MAC addresses on an interface are secured:
• local(1) – Local resource was used. The interface secures at
least one secure MAC address entry. Each interface can store
up to 64 local resources.
• shared(2) – Shared resource was used. When an interface has
secured enough MAC addresses to reach its limit for local
resources, it can secure additional MAC addresses by using
global or shared resources.
snPortMacSecurityQueryIndex
brcdIp.1.1.3.24.1.1.1.1.3
Syntax: Unsigned32
Read-only An index for a MAC address entry that was secured for this
interface.
snPortMacSecurityMAC
brcdIp.1.1.3.24.1.1.1.1.4
Syntax: Integer
Read-only The secured MAC address.