User Manual
400 Unified IP MIB Reference
53-1003106-01
IPv4 ACL table
40
snAgAclSourceOperator
brcdIp.1.2.2.15.2.1.8
Syntax: Operator
Read-write Applies only to TCP or UDP ports in extended ACLs.
Indicates how the policy will be compared to the ports
specified in the “snAgAclSourceOperand1” and
“snAgAclSourceOperand2” objects:
• eq(0) – The policy applies only to packets whose
source port number matches the port number
specified in the objects.
• neq(1) – The policy applies only to packets whose
source port numbers are not included in the
specified range.
• lt(2) – The policy applies only to packets whose
source port numbers are less than those in the
specified range.
• gt(3) – The policy applies only to packets whose
source port numbers are greater than those in the
specified range.
• range(4) – The policy applies to packets whose
source port numbers fall within the specified range.
• undefined(7)
snAgAclSourceOperand1
brcdIp.1.2.2.15.2.1.9
Syntax: Integer
Read-write Applies only to TCP or UDP ports in extended ACLs.
Shows the source port number to be matched. If used with
the “snAgAclSourceOperand2” object, it defines the start
of the range of source port numbers to be matched.
Valid values: 0 – 65535. A value of 0 means that this
object is not applicable.
snAgAclSourceOperand2
brcdIp.1.2.2.15.2.1.10
Syntax: Integer
Read-write Applies only to TCP or UDP ports in extended ACLs.
Used with the “snAgAclSourceOperand1” object, it defines
the end of the range of source port numbers to be
matched.
Valid values: 0 – 65535. A value of 0 means that this
object is not applicable.
snAgAclDestinationIp
brcdIp.1.2.2.15.2.1.11
Syntax: IpAddress
Read-write Applies only to extended ACLs.
Identifies the destination IP address of the packet that can
either be permitted or denied.
snAgAclDestinationMask
brcdIp.1.2.2.15.2.1.12
Syntax: IpAddress
Read-write Applies only to extended ACLs.
Identifies the destination subnet mask of the packet that
can either be permitted or denied.
Name, OID, and syntax Access Description