User Manual

404 Unified IP MIB Reference
53-1003106-01
IPv4 ACL table
40
snAgAclIcmpCode
brcdIp.1.2.2.15.2.1.30
Syntax: Integer
Read write If you entered a value for ICMP message type number in
the “snAgAclSourceOperand2” object, enter the code
number in this object.
Valid value for type code 1, Echo reply
1 = Echo reply
Valid values for type code 4, Destination unreachable
1 = Network unreachable
2 = Host unreachable
3 = Protocol unreachable
4 = Port unreachable
5 = Fragmentation needed but do not fragment bit
set
6 = Source route failed
7 = Destination network unknown
8 = Destination host unknown
9 = Source host isolated
10 = Destination network administratively prohibited
11 = Destination host administratively prohibited
12 = Network unreachable for TOS
13 = Host unreachable for TOS
14 = Communication administratively prohibited by
filter
15 = Host precedence violation
16 = Precedence cutoff in effect
Valid values for type code 5, Source quench
1 = Source quench
Valid values for type code 6, Redirect
1 = Redirect for network
2 = Redirect for host
3 = Redirect for TOS and network
4 = Redirect for TOS and host
Valid value for type code 9, Echo request
1 = Echo request
Valid value for type code 10, Router advertisement
1 = Router advertisement
Valid value for type code 11, Router solicitation
1 = Router solicitation
Valid values for type code 12, Time exceeded
1 = Time to live equals 0 during transmit
2 = Time to live equals 0 during reassembly
Valid values for type code 13, Parameter problem
1 = IP header bad (catchall error)
2 = Required option missing
Valid value for type code 14, Timestamp request
1 = Timestamp request
Valid value for type code 15, Timestamp reply
1 = Timestamp reply
Valid value for type code 16, Information request
1 = Information request
Valid value for type code 17, Information reply
1 = Information reply
Name, OID, and syntax Access Description