User Manual
434 Unified IP MIB Reference
53-1003106-01
MCT cluster ICL table
43
MCT cluster ICL table
The following table lists the Inter-Chassis Link (ICL) MCT cluster MIB objects.
brcdMctClusterDeployFailur
eReason
(continued)
• rBridgeIdUsedInPeerOrClientConfig(18)—Indicates the remote
bridge ID is used in peer or client configurations.
• clientInterfaceIsNotInMemberVlan(19)—Indicates the client
interface is not in the member VLAN.
• defaultVlanConfigAsSessOrMemberVlan(20)—Indicates the
default VLAN is configured as the session or member VLAN.
brcdMctClusterRowStatus
brcdIp.1.1.12.1.1.2.1.12
Syntax: RowStatus
Read-create The row status of the MCT clusters. All the row status values are
supported. The notInService(2) value indicates the cluster is not yet
activated.
The following objects must be present in the same SNMP SET
request to create a row with the brcdMctClusterRowStatus object
set to the createAndGo(4) value:
• brcdMctClusterName
• brcdMctClusterRbridgeId
• brcdMctClusterSessionVlan
• brcdMctClusterMemberVlans
The brcdMctClusterName object must be present in the same
SNMP SET request to create a row in the brcdMctClusterTable with
the brcdMctClusterRowStatus object set to the createAndWait(5)
value.
If the cluster is deployed, then the brcdMctClusterRowStatus object
cannot be set to destroy(6).
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdMctClusterIclTable
brcdIp.1.1.12.1.1.3
None The MCT cluster ICL table.
brcdMctClusterIclName
brcdIp.1.1.12.1.1.3.1.1
Syntax: DisplayString
None The name of the ICL.
Valid values: 1 - 64
brcdMctClusterIclIfIndex
brcdIp.1.1.12.1.1.3.1.2
Syntax: InterfaceIndex
Read-create The interface index of the ICL. The ICL interface can be a single
Ethernet interface or trunk interface index.
brcdMctClusterIclRowStatus
brcdIp.1.1.12.1.1.3.1.3
Syntax: RowStatus
Read-create The row status of the MCT cluster ICL entry. It supports only the
active(1), createAndGo(4), and destroy (6) values of the row status.
If the cluster is deployed, then the brcdMctClusterIclRowStatus
object cannot be set to destroy(6).
If the brcdMctClusterIclName object is used in the peer
configuration for the brcdMctClusterPeerIclName object, then the
peer configuration must be removed before setting the
brcdMctClusterIclRowStatus object to destroy(6).