User Manual
440 Unified IP MIB Reference
53-1003106-01
VSRP interface table
44
VSRP interface table
The following table contains objects used to configure VSRP interfaces. The following objects are
equivalent to the vsrp auth-type CLI command.
NOTE
Make sure that “snVsrpGroupOperModeVsrp” is set to enable(1).
VSRP virtual router table
The VSRP virtual router table describes the configuration of the VSRP virtual router. The following
objects are equivalent to the vsrp vrid and show vsrp CLI commands.
snVsrpIfMaxNumVridPerSystem
brcdIp.1.1.3.21.1.4
Syntax: Integer32
Read-only Indicates the maximum number of VRIDs that a system can
have.
snVsrpClearVrrpStat
brcdIp.1.1.3.21.1.5
Syntax: Integer
Read-write Clears the VSRP statistics:
• normal(0)
• clear(1)
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snVsrpIfTable
brcdIp.1.1.3.21.2.1
None The VSRP interface table.
snVsrpIfVlanId
brcdIp.1.1.3.21.2.1.1.1
Syntax: Integer32
Read-only VLAN ID used to index the entries in this table.
snVsrpIfAuthType
brcdIp.1.1.3.21.2.1.1.2
Syntax: Integer
Read-write Indicates the authorization type used to verify access to the interface:
• noAuth(0)
• simpleTextPasswd(1)
• ipAuthHeader(2)
snVsrpIfAuthPassword
brcdIp.1.1.3.21.2.1.1.3
Syntax: OCTET STRING
Read-write The simple text password is allowed only if the “snVsrpIfAuthType” is
simpleTextPasswd(1) and the size should be greater than zero.
This object can contain 0 to 8 octets and if the value is noAuth then
zero length string is returned.
Name, OID, and syntax Access Description
snVsrpVirRtrTable
brcdIp.1.1.3.21.3.1
None The VSRP virtual router table.
snVsrpVirRtrVlanId
brcdIp.1.1.3.21.3.1.1.1
Syntax: Integer32
Read-only VLAN index of the VSRP router.
snVsrpVirRtrId
brcdIp.1.1.3.21.3.1.1.2
Syntax: Integer
Read-only Shows a virtual router ID for the interface.