User Manual
Unified IP MIB Reference 457
53-1003106-01
IP interface port address table
46
IP interface port address table
The IP interface port address table shows the port IP address and its port type.
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, and Brocade
NetIron XMR devices.
snRtStaticArpIp
brcdIp.1.2.2.5.1.2
Syntax: IpAddress
Read-write Shows the IP address of a static ARP entry.
snRtStatkicArpMac
brcdIp.1.2.2.5.1.3
Syntax: OCTET STRING
Read-write Specifies the MAC address of a static ARP entry.
snRtStaticArpPort
brcdIp.1.2.2.5.1.4
Syntax: PortIndex
Read-write Specifies the port number attached to the device that has the MAC
address of the entry.
For FastIron or NetIron products, the value of this object is from 1
through 42.
snRtStaticArpRowStatus
brcdIp.1.2.2.5.1.5
Syntax: Integer
Read-write Controls the management of the table rows. The following values can be
written:
• delete(3) – Delete the row.
• create(4) – Create a new row.
• modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row.
• invalid(1) – Row is inoperative.
• valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snRtIpPortAddrTable
brcdIp.1.2.2.6
None IP port address table.
snRtIpPortAddrPortIndex
brcdIp.1.2.2.6.1.1
Syntax: PortIndex
Read-only The index of the port address entry.
For FastIron or NetIron products, the value of this object is from 1
through 42.
snRtIpPortAddress
brcdIp.1.2.2.6.1.2
Syntax: IpAddress
Read-only Specifies the port IP address.
snRtIpPortSubnetMask
brcdIp.1.2.2.6.1.3
Syntax: IpAddress
Read-write Specifies the port IP address subnet mask.