User Manual

460 Unified IP MIB Reference
53-1003106-01
Port configuration tables
46
IP interface address table
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
IP interface port access table
The following table determines if the port is for incoming or outgoing traffic and the filter used on
the interface.
NOTE
The following table is not supported on the Brocade MLXe, Brocade NetIron MLX, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snRtIpPortMetric
brcdIp.1.2.2.8.1.4
Syntax: Integer
Read-write Specifies the metric or cost the router adds to the route.
Valid values: 1 – 15
Default: 1
snRtIpPortDirBcastFwd
brcdIp.1.2.2.8.1.5
Syntax: Integer
Read-write Indicates if the directed broadcast forwarding feature is enabled. A
directed broadcast is a packet containing all ones (or in some cases, all
zeros) in the host portion of the destination IP address. When a router
forwards such a broadcast, it sends a copy of the packet out each of its
enabled IP interfaces:
• disabled(0)
• enabled(1)
Default: enabled(1)
Name, OID, and syntax Access Description
snRtIpPortIfAddrTable
brcdIp.1.2.2.18
None IP port interface address table.
snRtIpPortIfAddrInterfac
eIndex
brcdIp.1.2.2.18.1.1
Syntax: InterfaceIndex
Read-only The interface index for port address entry.
snRtIpPortIfAddress
brcdIp.1.2.2.18.1.2
Syntax: IpAddress
Read-only The port IP address.
snRtIpPortIfSubnetMas
k
brcdIp.1.2.2.18.1.3
Syntax: IpAddress
Read-write The port IP address subnet mask.
snRtIpPortIfAddrType
brcdIp.1.2.2.18.1.4
Syntax: Integer
Read-write The port IP address type.
snRtIpPortIfRowStatus
brcdIp.1.2.2.18.1.5
Syntax: RowStatus
Read-write To create or delete a port address entry.
Name, OID, and syntax Access Description