User Manual

Unified IP MIB Reference 471
53-1003106-01
IPX SAP filter table
48
IPX SAP filter table
The following table is used to define filters that a router uses to block SAP routes being advertised
to other parts of the network.
snIpxRipFilterMask
brcdIp.1.2.1.6.1.1.4
Syntax: NetNumber
Read-write Indicates the IPX RIP filter network or subnet mask.
snIpxRipFilterRowStatus
brcdIp.1.2.1.6.1.1.5
Syntax: Integer
Read-write Controls the management of the table rows. The following values can be
written:
• delete(3) – Delete the row.
• create(4) – Create a new row.
• modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row.
• invalid(1) – Row is inoperative.
• valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snIpxSapFilterTable
brcdIp.1.2.1.7.1
None The IPX SAP filter table.
snIpxSapFilterId
brcdIp.1.2.1.7.1.1.1
Syntax: Integer
Read-only The filter ID for a filter entry.
snIpxSapFilterAction
brcdIp.1.2.1.7.1.1.2
Syntax: Integer
Read-write Determines what action to take if the IPX packet matches this filter:
• deny(0)
• permit(1)
snIpxSapFilterType
brcdIp.1.2.1.7.1.1.3
Syntax: Integer
Read-write Identifies the IPX SAP filter type to be matched.
snIpxSapFilterName
brcdIp.1.2.1.7.1.1.4
Syntax: OCTET STRING
Read-write Identifies the IPX SAP filter name.
Valid values: Up to 47 octets.
snIpxSapFilterRowStatus
brcdIp.1.2.1.7.1.1.5
Syntax: Integer
Read-write Controls the management of the table rows. The following values can
be written:
• delete(3) – Delete the row.
• create(4) – Create a new row.
• modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row.
• invalid(1) – Row is inoperative.
• valid(2) – Row exists and is valid.