User Manual

474 Unified IP MIB Reference
53-1003106-01
IPX port counters table
48
IPX port counters table
The following table explains the MIB objects of the IPX port counters.
Name, OID, and syntax Access Description
snIpxPortAddrTable
brcdIp.1.2.1.11.1
None The IPX port address table.
snIpxPortAddrPort
brcdIp.1.2.1.11.1.1.1
Syntax: PortIndex
Read-only The port index for port address entry.
snIpxPortAddrEncap
brcdIp.1.2.1.11.1.1.2
Syntax: Integer
Read-only Shows the IPX frame encapsulation type:
• Ethernet8022(1)
• Ethernet8023(2)
• EthernetII(3)
• EthernetSnap(4)
Each network number must be assigned a unique frame type;
otherwise, an SNMP-SET error is returned.
snIpxPortAddrNetNum
brcdIp.1.2.1.11.1.1.3
Syntax: NetNumber
Read-write A unique network number for the IPX interface port.
snIpxPortAddrRowStatus
brcdIp.1.2.1.11.1.1.4
Syntax: Integer
Read-write Controls the management of the table rows. The following values can
be written:
• delete(3) – Delete the row.
• create(4) – Create a new row.
• modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
• noSuch(0) – No such row.
• invalid(1) – Row is inoperative.
• valid(2) – Row exists and is valid.
snIpxPortAddrNetBiosFilte
rMode
brcdIp.1.2.1.11.1.1.5
Syntax: Integer
Read-write Shows the status of the NetBios filter mode for each port address:
• disabled(0)
• enabled(1)
Name, OID, and syntax Access Description
snIpxPortCountersTable
brcdIp.1.2.1.12.1
None The IPX port counters table.
snIpxPortCountersPort
brcdIp.1.2.1.12.1.1.1
Syntax: PortIndex
Read-only The port index for an entry in the table.
snIpxPortCountersRcvPkt
sCnt
brcdIp.1.2.1.12.1.1.2
Syntax: Counter
Read-only The IPX incoming packets counter for the interface.