User Manual
Unified IP MIB Reference 481
53-1003106-01
BGP4 general variables
49
snBgp4NextBootMaxAttributes
brcdIp.1.2.11.1.35
Syntax: Integer
Read-write Defines the next boot maximum attribute entries.
Default: 10000 (which means to reset to the default)
snBgp4ClusterId
brcdIp.1.2.11.1.36
Syntax: Integer32
Read-write Defines a cluster ID which is represented by 4-unsigned-byte
integers (0..0xFFFFFFFF). 0 means to reset to the default.
snBgp4ClientToClientReflection
brcdIp.1.2.11.1.37
Syntax: Integer
Read-write Indicates if the client-to-client reflection in BGP4 is enabled:
• disabled(0)
• enabled(1)
snBgp4GenTotalNeighbors
brcdIp.1.2.11.1.38
Syntax: Integer32
Read-only Shows the current total number of neighbors running in a
BGP group.
snBgp4GenMaxPaths
brcdIp.1.2.11.1.39
Syntax: Integer
Read-write Indicates the maximum number of configured paths.
snBgp4GenConfedId
brcdIp.1.2.11.1.40
Syntax: Integer
Read-write Determines the BGP4 confederation ID. This ID identifies the
confederation to BGP routers outside the confederation.
A confederation is a BGP4 AS that has been subdivided into
multiple, smaller autonomous systems. Subdividing an AS
into smaller autonomous systems simplifies administration
and reduces BGP-related traffic, thus reducing the complexity
of the Interior Border Gateway Protocol (IBGP) mesh among
the BGP routers in the AS.
The confederation ID is the AS ID.
snBgp4GenConfedPeers
brcdIp.1.2.11.1.41
Syntax: OCTET STRING
Read-write Specifies the sub-AS numbers that are members of the
confederation. There is a maximum of 50 peers.
This is a number from 1 to 0xFFFF. It is represented by two
octets.
snBgp4GenDampening
brcdIp.1.2.11.1.42
Syntax: Integer
Read-write Specifies the dampening of BGP4 in the device:
• none(0) – BGP4 dampening is off.
• parameters(1) – Parameters are configurable.
• routemap(2) – The route map is configurable.
snBgp4GenDampenHalfLife
brcdIp.1.2.11.1.43
Syntax: Integer
Read-write Specifies the number of minutes after which the route’s
penalty becomes half its value.
snBgp4GenDampenReuse
brcdIp.1.2.11.1.44
Syntax: Integer
Read-write Specifies how low a route’s penalty must be before the route
becomes eligible for use again after being suppressed.
snBgp4GenDampenSuppress
brcdIp.1.2.11.1.45
Syntax: Integer
Read-write Specifies how high a route’s penalty can be before the Layer
3 Switch suppresses the route.
snBgp4GenDampenMaxSuppress
brcdIp.1.2.11.1.46
Syntax: Integer
Read-write Specifies the maximum number of minutes that a route can
be suppressed regardless of how unstable it is.
Name, OID, and syntax Access Description