User Manual

Unified IP MIB Reference 497
53-1003106-01
BGP4 route map set table
49
BGP4 route map set table
The BGP4 route map set table describes the route map set MIB objects.
snBgp4RouteMapMatchAddressAcces
sList
brcdIp.1.2.11.13.1.1.13
Syntax: OCTET STRING
Read-write Indicates which BGP address access list this route must
match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five sets of two octets.
snBgp4RouteMapMatchAddressPrefixL
ist
brcdIp.1.2.11.13.1.1.14
Syntax: OCTET STRING
Read-write Indicates the prefix list that must match a BGP address
access list.
Valid values: Up to 170 octets.
snBgp4RouteMapMatchNextHopAcces
sList
brcdIp.1.2.11.13.1.1.15
Syntax: OCTET STRING
Read-write Indicates the ID of the next-hop router that this route
must match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five integers. Each integer has two octets.
snBgp4RouteMapMatchNextHopPrefix
List
brcdIp.1.2.11.13.1.1.16
Syntax: OCTET STRING
Read-write Indicates the prefix list of the next-hop router that this
route must match.
Valid values: Up to 170 octets.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snBgp4RouteMapSetTable
brcdIp.1.2.11.14.1
None The BGP4 route map set table.
snBgp4RouteMapSetMapName
brcdIp.1.2.11.14.1.1.1
Syntax: OCTET STRING
Read-only An octet string of the route map name; each character of the
name is represented by one octet.
snBgp4RouteMapSetSequenceNu
m
brcdIp.1.2.11.14.1.1.2
Syntax: Integer32
Read-only A sequence number for this particular route map.
s n B g p 4 R o u t e M a p S e t A s P a t h T y p e
brcdIp.1.2.11.14.1.1.3
Syntax: Integer
Read-write Modifies an autonomous system path for BGP routes:
• tag(0) - Converts the tag of a route into an autonomous
system path.
• prepend(1) - Appends the string from
snBgp4RouteMapSetAsPathString to the AS-Path of
the route that is matched by the route map.
snBgp4RouteMapSetAsPathString
brcdIp.1.2.11.14.1.1.4
Syntax: OCTET STRING
Read-write This AS-Path string is used only if
snBgp4RouteMapSetAsPathCmd was sent together with the
value set to prepend(1).
snBgp4RouteMapSetAutoTag
brcdIp.1.2.11.14.1.1.5
Syntax: Integer
Read-write Enables or disables the automatic tag for BGP routes.