User Manual
500 Unified IP MIB Reference
53-1003106-01
BGP4 neighbor operational status table
49
snBgp4NeighOperStatusState
brcdIp.1.2.11.15.1.1.5
Syntax: Integer
Read-only Shows the state of this neighbor:
• noState(0)
• idle(1) – BGP4 process is waiting to be started. Usually,
enabling BGP4 or establishing a neighbor session
starts the BGP4 process. A minus sign (-) indicates that
the session has gone down and the software is
clearing or removing routes.
• connect(2) – BGP4 is waiting for the connection
process for the TCP neighbor session to be completed.
• active(3) – BGP4 is waiting for a TCP connection from
the neighbor.
• openSent(4) – BGP4 is waiting for an OPEN message
from the neighbor.
• openConfirm(5) – BGP4 has received an OPEN
message from the neighbor and is now waiting for
either a KEEPALIVE or NOTIFICATION message. If the
router receives a KEEPALIVE message from the
neighbor, the state changes to established(6). If the
message is a NOTIFICATION, the state changes to
idle(1).
• established(6) – BGP4 is ready to exchange UPDATE
messages with the neighbor.
NOTE: If there is more BGP data in the TCP receiver queue,
a plus sign (+) is also displayed.
snBgp4NeighOperStatusKeepAlive
Time
brcdIp.1.2.11.15.1.1.6
Syntax: Integer
Read-only Specifies how often this router sends keepalive messages
to the neighbor.
snBgp4NeighOperStatusHoldTime
brcdIp.1.2.11.15.1.1.7
Syntax: Integer32
Read-only Specifies how many seconds the router will wait for a
keepalive or update message from a BGP4 neighbor before
deciding that the neighbor is dead.
snBgp4NeighOperStatusAdvertleve
l
brcdIp.1.2.11.15.1.1.8
Syntax: Integer32
Read-only Shows the minimum interval between the sending of BGP
routing updates.
snBgp4NeighOperStatusKeepAlive
TxCounts
brcdIp.1.2.11.15.1.1.9
Syntax: Integer32
Read-only Shows the number of keepalive message sent.
snBgp4NeighOperStatusKeepAlive
RxCounts
brcdIp.1.2.11.15.1.1.10
Syntax: Counter32
Read-only Shows the number of keepalive message received.
snBgp4NeighOperStatusUpdateTxC
ounts
brcdIp.1.2.11.15.1.1.11
Syntax: Counter32
Read-only Shows the number of updated messages sent.
snBgp4NeighOperStatusUpdateRx
Counts
brcdIp.1.2.11.15.1.1.12
Syntax: Counter32
Read-only Shows the number of updated messages received.
Name, OID, and syntax Access Description