User Manual

Unified IP MIB Reference 27

53-1003106-01

RFC 2932: IPv4 Multicast Routing MIB

IP multicast scalar

ipMRouteTable (IP multicast route table)

Use the show ip pim mcache CLI command to display the information for the IP multicast route

table.

Use the show ip route and show ip mroute commands to display the route information

(ipMRouteRtAddress, ipMRouteRtMask, and ipMRouteRtType).

The SET request is not supported for this table.

Object Object identifier Supported?

ipMRouteEnable 1.3.6.1.2.1.83.1.1.1 Yes. Use either the [no] ip multicast-routing or

[no] router pim command to configure IP multicast

routing on the router.

ipMRouteEntryCount 1.3.6.1.2.1.83.1.1.7 Yes. Use the show ip pim mcache [count] command

to display the the number of rows in the

ipMRouteTable.

Object Object identifier Supported?

ipMRouteGroup 1.3.6.1.2.1.83.1.1.2.1.1 Yes

ipMRouteSource 1.3.6.1.2.1.83.1.1.2.1.2 Yes

ipMRouteSourceMask 1.3.6.1.2.1.83.1.1.2.1.3 Yes

ipMRouteUpstreamNeighbor 1.3.6.1.2.1.83.1.1.2.1.4 Yes, but read-only.

ipMRouteInIfIndex 1.3.6.1.2.1.83.1.1.2.1.5 Yes, but read-only.

ipMRouteUpTime 1.3.6.1.2.1.83.1.1.2.1.6 Yes, but read-only.

ipMRouteExpiryTime 1.3.6.1.2.1.83.1.1.2.1.7 Yes, but read-only.

ipMRoutePkts 1.3.6.1.2.1.83.1.1.2.1.8 Yes, but read-only.

ipMRouteDifferentInIfPackets 1.3.6.1.2.1.83.1.1.2.1.9 No

NOTE: This object is not supported

on the Brocade MLXe,

Brocade NetIron MLX,

Brocade NetIron XMR,

Brocade NetIron CES, and

Brocade NetIron CER series

devices.

ipMRouteOctets 1.3.6.1.2.1.83.1.1.2.1.10 No