User Manual

534 Unified IP MIB Reference
53-1003106-01
Trap support objects
50
Name, OID, and syntax Access Description
snOspfSetTrap
brcdIp.1.2.4.15.1
Syntax: OCTET STRING
Read-write Indicates if specific OSPF traps are enabled.
The four octets serves as a bit map for the trap events defined by the
OSPF traps. A value of 1 in the bit field indicates that the trap is
enabled. The right-most bit (least significant) represents Trap 0.
snOspfConfigErrorType
brcdIp.1.2.4.15.2
Syntax: Integer
Read-only Indicates the potential types of configuration conflicts used by the
ospfConfigError and ospfConfigVirtError traps:
• badVersion(1)
• areaMismatch(2)
• unknownNbmaNbr(3) – Router is eligible.
• unknownVirtualNbr(4)
• authTypeMismatch(5)
• authFailure(6)
• netMaskMismatch(7)
• helloIntervalMismatch(8)
• deadIntervalMismatch(9)
• optionMismatch(10)}
snOspfPacketType
brcdIp.1.2.4.15.3
Syntax: Integer
Read-only Indicates the OSPF packet type in the trap:
• hello(1)
• dbDescript(2)
• lsReq(3)
• lsUpdate(4)
• lsAck(5)}
snOspfPacketSrc
brcdIp.1.2.4.15.4
Syntax: IpAddress
Read-only Shows the IP address of an inbound packet that cannot be identified
by a neighbor instance.
snOspfTrapsGenerationMode
brcdIp.1.2.4.15.5
Syntax: RtrStatus
Read-write Indicates if this router has been enabled to generate OSPF traps:
• disabled(0) – OSPF traps cannot be generated by this router,
even if the “snOspfSetTrap” object is set to generate traps.
• enabled(1) – OSPF traps can be generated by the router.
This object provides global control on the generation of traps.