User Manual

Unified IP MIB Reference 561
53-1003106-01
Chapter
55
PIM MIB Definition
In this chapter
•Common PIM objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 561
•PIM virtual interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 562
•PIM neighbor table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 564
•PIM virtual interface statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 564
•PIM-SM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566
Common PIM objects
NOTE
The following section describes the Protocol Independent Multicast (PIM) MIB objects that are
supported on the Unified IP MIB. The following objects are not supported on the Brocade NetIron
MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, Brocade NetIron CER series and
Brocade FastIron devices.
The following table presents objects that are common to all PIM interfaces.
Name, OID, and syntax Access Description
snPimEnable
brcdIp.1.2.9.1.1
Syntax: RtrStatus
Read-write Determines if PIM is enabled on this Layer 3 Switch:
• disabled(0)
• enabled(1)
Default: disabled(0)
The remaining objects apply only if this object is set to
enabled(1).
snPimNeighborRouterTimeout
brcdIp.1.2.9.1.2
Syntax: Integer
Read-write Specifies the number of seconds the PIM Layer 3 Switch
waits before it considers a neighbor to be absent. Absence
of PIM hello messages from a neighboring Layer 3 Switch
indicates that a neighbor is not present.
Valid values: 60 – 8000 seconds
Default: 180 seconds