User Manual

Unified IP MIB Reference 571
53-1003106-01
IGMP static group table
56
NOTE
The following table objects are not supported on the Brocade FastIron devices.
Name, OID, and syntax Access Description
snIgmpStaticGroupTable
brcdIp.1.2.6.1.4
None The IGMP static group table.
snIgmpStaticGroupIfIndex
brcdIp.1.2.6.1.4.1.1
Syntax: Integer32
Read-only Shows the interface for which the group was configured.
snIgmpStaticGroupAddress
brcdIp.1.2.6.1.4.1.2
Syntax: IpAddress
Read-only Shows the IP address for the group.
snIgmpStaticGroupPortList
brcdIp.1.2.6.1.4.1.3
Syntax: OCTET STRING
Read-write Contains a list of ports that are members of the static group. Each
port contains a 16-bit integer ifIndex.
snIgmpStaticGroupRowStatus
brcdIp.1.2.6.1.4.1.4
Syntax: Integer
Read-write Controls the management of the table rows. The following values
can be written:
delete(3) – Deletes the row.
create(4) – Creates a new row.
modify(5) – Modifies an existing row.
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
other(1) – Row is inoperative.
valid(2) – Row exists and is valid.