User Manual
574 Unified IP MIB Reference
53-1003106-01
DOS attack statistics
57
DOS attack statistics
The following objects provide denial of service (DOS) attack statistics through SNMP.
DOS attack port table
The following objects have been created to filter traffic for DOS-attacks through SNMP.
NOTE
The DOS attack port MIBs are supported on the Brocade NetIron MLX, Brocade MLXe, and Brocade
NetIron XMR devices.
Name, OID, and syntax Access Description
snQosBindTable
brcdIp.1.1.3.14.2
None The QoS bind table.
snQosBindIndex
brcdIp.1.1.3.14.2.1.1
Syntax: Integer
Read-only The table index of the QoS Bind.
snQosBindPriority
brcdIp.1.1.3.14.2.1.2
Syntax: Integer32
Read-only Shows the QoS bind priority.
snQosBindProfileIndex
brcdIp.1.1.3.14.2.1.3
Syntax: Integer
Read-write An index that serves as a pointer to the index of the
“snQosProfileTable”.
Name, OID, and syntax Access Description
snDosAttackICMPDropCount
brcdIp.1.1.3.14.3.1.1
Syntax: Counter32
Read-only Provides the contents of the ICMP drop counter.
snDosAttackICMPBlockCount
brcdIp.1.1.3.14.3.1.2
Syntax: Counter32
Read-only Provides the contents of the ICMP block counter.
snDosAttackSYNDropCount
brcdIp.1.1.3.14.3.1.3
Syntax: Counter32
Read-only Provides the contents of the SYN drop counter.
snDosAttackSYNBlockCount
brcdIp.1.1.3.14.3.1.4
Syntax: Counter32
Read-only Provides the contents of the SYN block counter.