User Manual

Unified IP MIB Reference 35

53-1003106-01

RFC 2934: Protocol Independent Multicast MIB for IPv4

pimRpSetTable (PIM RP set table)

Use the show ip pim rp-set command to display information about the PIM RP set table.

pimCandidateRPTable (PIM candidate-RP table)

The show ip pim bsr command displays information about the PIM candidate-RP table.

pimComponentTable (PIM component table)

This table contain objects specific to PIM domain and has only one row for each domain to which

the router is connected.

Use the ip pim border CLI command at the interface level to stop the flooding of the bootstrap

messages.

The show ip pim bsr command displays information about the PIM component table.

pimRPLastChange 1.3.6.1.3.61.1.1.5.1.5 No.

pimRPRowStatus 1.3.6.1.3.61.1.1.5.1.6 Yes, but read-only.

Object Object identifier Supported?

pimRpSetGroupAddress 1.3.6.1.3.61.1.1.6.1.1 Yes

pimRpSetGroupMask 1.3.6.1.3.61.1.1.6.1.2 Yes

pimRpSetAddress 1.3.6.1.3.61.1.1.6.1.3 Yes

pimRpSetHoldTime 1.3.6.1.3.61.1.1.6.1.4 Yes, but read-only.

pimRpSetExpiryTime 1.3.6.1.3.61.1.1.6.1.5 Yes, but read-only.

pimRpSetComponent 1.3.6.1.3.61.1.1.6.1.6 Yes, but only one PIM domain is

supported.

Object Object identifier Supported?

pimCandidateRPGroupAddress 1.3.6.1.3.61.1.1.11.1.1 Yes

pimCandidateRPGroupMask 1.3.6.1.3.61.1.1.11.1.2 Yes.

pimCandidateRPAddress 1.3.6.1.3.61.1.1.11.1.3 Yes, but read-only.

pimCandidateRPRowStatus 1.3.6.1.3.61.1.1.11.1.4 Yes, but read-only. Returns “active”.

Object Object identifier Supported?

pimComponentIndex 1.3.6.1.3.61.1.1.12.1.1 Yes

pimComponentBSRAddress 1.3.6.1.3.61.1.1.12.1.2 Yes, but read-only.

pimComponentBSRExpiryTime 1.3.6.1.3.61.1.1.12.1.3 Yes, but read-only.

pimComponentCRPHoldTime 1.3.6.1.3.61.1.1.12.1.4 Yes, but read-only.

pimComponentStatus 1.3.6.1.3.61.1.1.12.1.5 Yes, but read-only. Returns “active”.

Object Object identifier Supported?