User Manual

598 Unified IP MIB Reference
53-1003106-01
MPLS or BGP Layer 3 VPN MIB
60
vplsConfigTable
The following table below presents the objects supported in the vplsConfigTable. Refer to “VPLS
instance table” on page 609 for objects that are not supported in this table.
NOTE
The following table is supported on Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR,
Brocade NetIron CES, and Brocade NetIron CER series devices.
Name, OID, and syntax Access Description
vplsConfigIndexNext
brcdIp.3.4.1.1.1
Syntax: Unsigned 32
Read-only Unique index for the conceptual row identifying a VPLS service.
However, in the current implementation, this index is always 0.
vplsStatusNotifEnable
brcdIp.3.4.1.1.5
Syntax: TruthValue
Read-write If this object is set to true(1), then it enables vplsStatusChanged
notification to be generated. Change notification is determined by
the use of the snmp-server enable trap mpls vpls and no
snmp-server enable trap mpls vpls commands.
vplsNotificationMaxRate
brcdIp.3.4.1.1.6
Syntax: SnmpAdminString
Read-write Always 0.
Name, OID, and syntax Access Supported?
vplsConfigIndex
brcdIp.3.4.1.1.2.1.1
Syntax: Unsigned 32
Read-only Yes
vplsConfigName
brcdIp.3.4.1.1.2.1.2
Syntax: SnmpAdminString
Read-only Yes
vplsConfigDescr
brcdIp.3.4.1.1.2.1.3
Syntax: SnmpAdminString
Read-only Always null string
vplsConfigAdminStatus
brcdIp.3.4.1.1.2.1.4
Syntax: Integer
Read-only Yes
Always up(1)
vplsConfigMacLearning
brcdIp.3.4.1.1.2.1.6
Syntax: TruthValue
Read-only Yes
Always true(1)
vplsConfigDiscardUnknownDest
brcdIp.3.4.1.1.2.1.7
Syntax: TruthValue
Read-only No
Always false(2)
vplsConfigMacAging
brcdIp.3.4.1.1.2.1.8
Syntax: TruthValue
Read-only Ye
Always true(1)
vplsConfigFwdFullHighWatermark
brcdIp.3.4.1.1.2.1.10
Syntax: Unsigned 32
Read-only Always 0