User Manual

604 Unified IP MIB Reference
53-1003106-01
MPLS administrative group table
60
MPLS administrative group table
The administrative groups, also known as resource classes or link colors, allow MPLS-enabled
interfaces to be assigned to various classes. A group name can be associated to up to 32
administrative groups on the device.
The following table contains the MPLS AdminGroup MIB objects that lists the Administrative Group
ID that has a configured group name. This is indexed by the Group ID, and with only one columnar
object, which is the group name in the DisplayString type. Use the show mpls policy command to
display the configured information of the Admin Group name to IPD mapping.
NOTE
This MPLS administrative group table is a read-only table and supports the GET, GETBULK, and
GETNEXT operations.
mplsLspShortcutIsisAnnounce
brcdIp.1.2.15.1.2.3.1.36
Syntax: TruthVal
Read-only Indicates that this IS-IS shortcut will be announced or
advertised. The metric to announce is specified by
mplsLspShortcutIsisAnnounceMetric.
The value of this variable is not applicable if
mplsLspShortcutIsisAllowed is “False”.
mplsLspShortcutIsisAnnounceMetric
brcdIp.1.2.15.1.2.3.1.37
Syntax: Unsigned32
Read-only Indicates the metric value to announce for this shortcut.
The value of this variable is not applicable if
mplsLspShortcutIsisAnnounce is “False”.
mplsLspShortcutIsisRelativeMetric
brcdIp.1.2.15.1.2.3.1.38
Syntax: Unsigned32
Read-only Indicates the relative metric used to compute the LSP cost
when announce is not enabled.
The value of this variable is not applicable if
mplsLspShortcutIsisAllowed is “False”.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdMplsAdminGroupTable
brcdlp.1.2.15.1.1.2
None The list of administrative groups (by ID) that have a
configured group name.
brcdMplsAdminGroupId
brcdlp.1.2.15.1.1.2.1.1
Syntax: Unsigned32
None Identifies the administrative group ID in a 1-based index.
The end user of this object must convert this to a 0-based
because the index maps to the bit position in the
constraint-based link selection.
brcdMplsAdminGroupName
brcdlp.1.2.15.1.1.2.1.2
Syntax: DisplayString
Read-write The group name with which this administrative group is
associated.
brcdMplsAdminGroupRowStatus
brcdlp.1.2.15.1.1.2.1.3
Syntax: RowStatus
Read-only The row status of an entry.
NOTE: A set request to this table is not supported. Always
returns “active” for the existing entries.