User Manual

Unified IP MIB Reference 605

53-1003106-01

MPLS interface table

The MPLS interface table contains all configured MPLS interfaces. It will be indexed by the ifIndex

of the MPLS-enabled port or the VE interface. Use the show mpls interface command to display the

configured information of interfaces and Admin Group settings.

NOTE

The MPLS interface table is a read-only table and supports the GET, GETBULK, and GETNEXT

operations.

Name, OID, and syntax Access Description

brcdMplsInterfaceTable

brcdlp.1.2.15.1.1.3

None The list of MPLS-enabled interfaces.

brcdMplsInterfaceIndex

brcdlp.1.2.15.1.1.3.1.1

Syntax: Unsigned32

None The ifIndex of the MPLS-enabled port or VE interface.

brcdMplsInterfaceAdminGroup

brcdlp.1.2.15.1.1.3.1.2

Syntax: MplsTunnelAffinity

Read-write Specifies to which administrative groups this

MPLS-enabled interface belongs to. It is represented in

bitmapped format where each bit from 0 through 31 maps

to the (internal) group ID. If a bit is set, it indicates that the

corresponding group ID is configured for a particular MPLS

interface.

brcdMplsInterfaceRowStatus

brcdlp.1.2.15.1.1.3.1.3

Syntax: RowStatus

Read-only The row status of an entry.

NOTE: A set request to this table is not supported. Always

returns “active” for the existing entries.