User Manual

610 Unified IP MIB Reference
53-1003106-01
VPLS MAC age timer configuration scalar objects
61
VPLS MAC age timer configuration scalar objects
The scalar objects in the following table helps to configure a global timer that controls MAC aging in
the system for local/remote entries. A new branch (brcdVplsScalarObjects) is created that contains
these scalar objects.
NOTE
The following scalar objects are supported on the Brocade NetIron XMR, Brocade NetIron MLX,
Brocade MLXe, Brocade NetIron CES, and Brocade NetIron CER series devices.
fdryVplsClearMac
brcdIp.1.2.15.2.2.2.1.3
Syntax: TruthValue
Read-only The Set value of TRUE tells the system to clear all the MAC addresses
learned by this VPLS instance. Setting a value of FALSE(2) returns an
error. During read operations, FALSE(2) is returned at all times.
fdryVplsVcId
brcdIp.1.2.15.2.2.2.1.4
Syntax: Unsigned 32
Read-only The VPLS Instance ID of a given VPLS session.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdVplsMacAgeTimeLocal
brcdIp.1.2.15.2.2.5.1
Syntax: Unsigned32
Read-write The age timer for local entries of VPLS MAC addresses in the
system.
Default value: 300
Configurable range: From 60 through 65535
brcdVplsMacAgeTimeRemote
brcdIp.1.2.15.2.2.5.2
Syntax: Unsigned32
Read-write The age timer for remote entries of VPLS MAC addresses in the
system.
Default value: 600
Configurable range: From 60 through 65535