User Manual

Unified IP MIB Reference 611
53-1003106-01
Chapter
62
SNMP Telemetry MIB Definition
In this chapter
Route map configuration table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
Route map match configuration table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 612
Route map set configuration table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Route map bind table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617
Route map rule display table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 618
The Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and
Brocade NetIron CER series devices are provided with Simple Network Management Protocol
(SNMP) support for the Telemetry Management Information Base (MIB). The following MIBs
describe the level of support provided for the Telemetry on the Brocade NetIron devices.
Route map configuration table
The following table contains MIB objects of the route map entries.
Name, OID, and syntax Access Description
brcdRouteMapTable
brcdIp.1.1.3.39.1.1.1
None The route map entries configuration table.
brcdRouteMapName
brcdIp.1.1.3.39.1.1.1.1.1
Syntax: DisplayString
None Identifies the route map on the Brocade NetIron devices. A
maximum of 80 characters is allowed.
brcdRouteMapSequence
brcdIp.1.1.3.39.1.1.1.1.2
Syntax: Unsigned32
None Identifies the sequence to insert or delete from the existing route
map entry.
brcdRouteMapAction
brcdIp.1.1.3.39.1.1.1.1.3
Syntax: Action
Read-create Identifies the action to be taken for the route map entry:
deny(0)
permit(1)
brcdRouteMapRuleName
brcdIp.1.1.3.39.1.1.1.1.4
Syntax: DisplayString
Read-create Identifies the path name for the route map. A maximum of 127
characters is allowed.
brcdRouteMapRowStatus
brcdIp.1.1.3.39.1.1.1.1.5
Syntax: RowStatus
Read-create The following options are supported:
active(1)—To return GET and GET-NEXT requests.
createAndGo(4)—To add a new row.
destroy(6)—To remove a row.
The other values in the enumeration are not supported.