User Manual

Unified IP MIB Reference 627
53-1003106-01
Chapter
64
AppleTalk MIB Definition
In this chapter
•AppleTalk general group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627
•AppleTalk socket priority table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 629
•AppleTalk port zone filter table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 630
•AppleTalk port table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631
•AppleTalk forwarding cache table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 632
•AppleTalk zone table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633
•AppleTalk additional zone filter table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633
The AppleTalk MIB objects in this chapter are supported only on Brocade NetIron MLX, Brocade
MLXe, Brocade NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
AppleTalk general group
The following table contains general objects of AppleTalk routing funtionalities.
Name, OID, and syntax Access Description
snRtATRoutingEnable
brcdIp.1.2.10.1.1
Syntax: Integer
Read-write Indicates if AppleTalk routing functions are enabled on this device:
• disabled(0)
• enabled(1)
snRtATClearArpCache
brcdIp.1.2.10.1.2
Syntax: ClearStatus
Read-write Indicates if the cache will be cleared:
• normal(0) – Data in AppleTalk ARP cache table will not be cleared.
• clear(1) – Data in AppleTalk ARP cache table will be cleared.
snRtATClearFwdCache
brcdIp.1.2.10.1.3
Syntax: ClearStatus
Read-write Indicates if all learned data from non-lo cal networks that is currently
in the AppleTalk forward cache table will be cleared:
• normal(0) – Data will not be cleared.
• clear(1) – Data will be cleared.
snRtATClearRoute
brcdIp.1.2.10.1.4
Syntax: ClearStatus
Read-write Indicates if all learned routes and zones (non-local routes and zones)
that currently resident in the AppleTalk route table will be cleared:
• normal(0) – Data will not be cleared.
• clear(1) – Data will be cleared.
snRtATClearTrafficCount
ers
brcdIp.1.2.10.1.5
Syntax: ClearStatus
Read-write Indicates if AppleTalk RT M P, Z I P, A E P, D D P, a n d A A R P statistics
counters will be cleared:
• normal(0) – Counters will not be cleared.
• clear(1) – Counters will be cleared.