User Manual

630 Unified IP MIB Reference
53-1003106-01
AppleTalk port zone filter table
64
AppleTalk port zone filter table
The AppleTalk Zone Filter Table shows if access to network zones is permitted or denied.
Name, OID, and syntax Access Description
snRtATSocketPriorityTable
brcdIp.1.2.10.2
None AppleTalk socket priority table.
snRtATSocketPrioritySocket
brcdIp.1.2.10.2.1.1
Syntax: Integer
Read-only The socket number for an entry. There can be up to 254 entries.
snRtATSocketPriorityPriority
brcdIp.1.2.10.2.1.2
Syntax: Integer
Read-write Indicates the QoS priority for the socket.
The priority level for a socket that applies to stackable devices:
• low(0) – Low priority
• high(1) – High priority
The priority level for a socket that applies to Chassis devicecs:
• level0(0)
• level1(1)
• level2(2)
• level3(3),
• level4(4)
• level5(5)
• level6(6)
• level7(7)
Name, OID, and syntax Access Description
snRtATPortZoneFilterTable
brcdIp.1.2.10.3
None AppleTalk port zone filter table.
snRtATPortZoneFilterPortIndex
brcdIp.1.2.10.3.1.1
Syntax: PortIndex
Read-only Shows the port index for a zone filter entry.
snRtATPortZoneFilterZone
brcdIp.1.2.10.3.1.2
Syntax: DisplayString
Read-only Shows the zone name granted for this filter:
• 0 to 32 octets of AppleTalk
• ASCII if outside of AppleTalk
snRtATPortZoneFilterAction
brcdIp.1.2.10.3.1.3
Syntax: Integer
Read-write Indicates what the device will do with the AppleTalk packet if it
matches this filter:
• deny(0)
• permit(1)