User Manual

42 Unified IP MIB Reference
53-1003106-01
RFC 3815: Definitions of Managed Objects for the Multiprotocol Label Switching (MPLS), Label Distribution
2
The tables mplsInterfacePerfTable, mplsOutSegmentPerfTable, mplsLabelStackTable, and
mplsInSegmentMapTable are not supported.
MPLS label stack scalar object
The following table lists the MPLS label stack scalar objects. The scalar objects
mplsInSegmentIndexNext, mplsOutSegmentIndexNext, mplsXCIndexNext, and
mplsLabelStackIndexNext are not supported.
RFC 3815: Definitions of Managed Objects
for the Multiprotocol Label Switching (MPLS),
Label Distribution Protocol (LDP)
The Brocade NetIron XMR, Brocade NetIron MLX, Brocade MLXe, Brocade NetIron CES, and
Brocade NetIron CER series devices support RFC 3815, Definitions of Managed Objects for the
Multiprotocol Label Switching (MPLS), and Label Distribution Protocol (LDP).
Support for this MIB enables configuration and monitoring of the LDP.
mplsLdpLsr objects
mplsLdpEntity objects
mplsXCAdminStatus 1.3.6.1.2.1.10.166.2.1.10.1.9 Yes
mplsXCOperStatus 1.3.6.1.2.1.10.166.2.1.10.1.10 Yes
Object Object identifier Supported?
mplsMaxLabelStackDepth 1.3.6.1.2.1.10.166.2.1.11 Yes. Always returns the maximum label stack
depth of 3.
Object Object identifier Supported?
Object Object identifier Supported?
mplsLdpLsrId 1.3.6.1.2.1.10.166.4.1.1 Yes
mplsLdpLsrLoopDetectionCapable 1.3.6.1.2.1.10.166.4.1.2 Returns none(1) or hopCountAndPathVector(5).
Object Object identifier Supported?
mplsLdpEntityLastChange 1.3.6.1.2.1.10.166.4.1.2.1 Always returns 0.
mplsLdpEntityIndexNext 1.3.6.1.2.1.10.166.4.1.2.2 Always returns 0.