User Manual

Unified IP MIB Reference 677
53-1003106-01
Roaming peer table
66
Roaming peer table
The roaming peer table shows information about the WLAN controller peers in a wireless mobility
configuration.
Access Point ADC table
The Access Point (AP) Automatic Discovery and Configuration (ADC) table defines the IP address,
subnet mask, and default gateway of the access point that will be assigned to an access point with
the specified MAC address. This information can be pre-configured on an interface of a WLAN
controller. When the access point that has the matching MAC address is attached to the interface,
the pre-configured IP address, subnet mask, and default gateway are assigned to that access
point.
Name, OID, and syntax Access Description
wgRoamingPeerTable
brcdIp.1.1.3.23.3
None Roaming peer table.
wgRoamingPeerIpAddress
brcdIp.1.1.3.23.3.1.1
Syntax: IpAddress
Read-only The IP address of a peer.
wgRoamingPeerConnection
Status
brcdIp.1.1.3.23.3.1.2
Syntax: Integer
Read-only Shows the state of the connection:
• other(1)
• configured(2)
• established(3)
wgRoamingPeerRowStatus
brcdIp.1.1.3.23.3.1.3
Syntax: Integer
Read-write Shows the state of the row in the peer row table:
• other(1)
• valid(2)
• delete(3)
• create(4)
Name, OID, and syntax Access Description
wgPnPTable
brcdIp.1.1.3.23.4
None AP ADC table.
wgPnPIfIndex
brcdIp.1.1.3.23.4.1.1
Syntax: Integer
Read-only The ifIndex value of the switch interface.
wgPnPMacAddress
brcdIp.1.1.3.23.4.1.2
Syntax: MacAddress
Read-only MAC address of the attached AP.
wgPnPIpAddress
brcdIp.1.1.3.23.4.1.3
Syntax: IpAddress
Read-write IP address of the attached AP.
wgPnPIpMask
brcdIp.1.1.3.23.4.1.4
Syntax: IpAddress
Read-write Subnet mask of the attached AP.