User Manual

Unified IP MIB Reference 729
53-1003106-01
General traps for the Brocade NetIron devices
67
snTrapDot1agCfmDomain
CrossConnection
brcdIp.0.194.
dot1agCfmMdName,
dot1agCfmMaNetNa
me,
snAgGblTrapMessage
Warning This trap is generated when the 802.1ag
domain gets cross-connected.
Sample trap message:
System: Cross Connection in
Domain MLX4maintDomain, MA
MLX4maintAsso
snTrapDot1agCfmDuplicat
eMEPId
brcdIp.0.195
dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage
Warning This trap is generated when the 802.1ag
Remote MEP reports a duplicate MEP ID
that conflicts with a local MEP ID.
Sample trap message:
System: Remote MEP ID 1 in
Domain MLX4maintDomain, MA
MLX4maintAsso is same as ours
snTrapChasFanOK
brcdIp.0.1000
snChasFanIndex,
snChasFanDescriptio
n
Minor One of the following occurred on the device:
The status of the fan operation
changed from failure to normal.
Fan speed changed due to a decrease
in the operating temperature.
Sample trap message:
Right fan tray (fan1) OK
snTrapTemperatureOK
brcdIp.0.1001
snAgGblTrapMessage Critical The actual temperature reading on the
device is below the warning temperature
threshold.
Samples trap message:
Switch Fabric 2 temperature
30.2 C degrees is normal
Switch Fabric 2 temperature
30.2 C degrees is normal
Linecard Module %d PCB
temperature 30.2 C degrees is
normal
Linecard Module %d XPP
temperature 30.2 C degrees is
normal
Active mgmt CPU temperature
30.2 C degrees is normal
Standby mgmt CPU temperature
30.2 C degrees is normal
snTrapCAMOverflow
brcdIp.0.1002
snAgGblTrapMessage Alerts One of the IP CAM levels is full.
Sample trap message:
NO MORE FREE CAM SPACE for IP
level <level>.
Trap name and number Varbinds Severity Description and trap message