Installation Procedure (Supporting VDX 6740T) User guide

Universal Four-Post Rack Kit Installation Procedure 13 of 20
53-1002944-01 Rev.B
Installation procedure for flush-rear (recessed) mounting
This approach is similar to the flush-front mounting except that the brackets are reversed on the switch.
ATTENTION
The switch must be turned off and disconnected from the fabric during this procedure.
Complete these tasks to install the switch in a four-post rack:
• “Attaching the front brackets to the rear of the switch”
• “Attaching the extensions to the front of the switch”
• “Installing the switch in the rack”
• “Attaching the rear brackets to the extensions at the front of the switch”
• “Attaching the rear brackets to the front rack posts”