Installation Procedure (Supporting VDX 6740T) User guide

6 of 20 Universal Four-Post Rack Kit Installation Procedure
53-1002944-01 Rev.B
Installation procedure for flush-front mounting
ATTENTION
The switch must be turned off and disconnected from the fabric during this procedure.
NOTE
Although this document describes how to install single-height (1U) and double-height (2U) switches, the illustrations
show a single-height switch as a typical installation.
Complete these tasks to install the switch in a four-post rack:
• “Attaching the front brackets”
• “Attaching the bracket extensions to the switch”
• “Installing the switch in the rack”
• “Attaching the rear brackets to the extensions”
• “Attaching the rear brackets to the rack posts”