QuickStart Guide User Manual

16 of 34 Brocade VDX 8770-8 QuickStart Guide
Publication Number: 53-1002555-01
• 48x1G and 48x10G line card modules — Ports are numbered from 1 through 48, from top to bottom, with the
odd-numbered ports on the right row and the even-numbered ports on the left row when installed in the switch.
Refer to Figure 4.
FIGURE 4 48x10G line card (48x1G line card similar)
Inserting a management module
For this procedure, refer to “ESD precautions” and Figure 5.
Complete the following steps to insert an MM.
1. Unpack the new MM and remove it from the anti-static bag.
2. Inspect the module for damage.
3. Remove the protective caps from the b ackplane connectors.
4. Rotate the ejectors toward the center of the module.