QuickStart Guide User Manual

20 of 34 Brocade VDX 8770-8 QuickStart Guide
Publication Number: 53-1002555-01
Inserting power supplies
The chassis can be powered with either AC or DC power supplies. They are slightly different in appearance and in the
way that the power cord is attached. Follow the procedure below for your type of power supply. Refer to Figure 8.
FIGURE 8 Inserting a power supply
Inserting an AC power supply
For this procedure, refer to “ESD precautions” and Figure 8.
To replace a power supply, complete the following steps.
DANGER
High Touch Current. Earth connection is essential before connecting the power supply.
1. Unpack the new power supply and remove it from the anti-static bag.
2. Inspect the power supply for damage.
3. Ensure that the handle of the replacement power supply is pushed down.